Tarzan M22 Splav Russian Tactical Vest

Description

Russian Tactical Vest Tarzan M32 (SPLAV)  is a classic chest rig vest with sewn pockets for machine gun equipment and PALS cells for hanging additional pouches.
Compatible with climbing system
Pockets can drain water
All pockets are fastened with flypapers, with convenient grip from a sling
The vest is fastened with a reinforced tractor zipper with a long grip of braid. The zipper for reliability is covered with a Velcro strap to protect against pollution and unloading
Detachable loops for fastening the unloading / pistol belt are sewn on the bottom
The vest size adjustment (from 46 to 68) is located on the sides of the lumbar panel and is made using slings and Duraflex® three-slot buckles; you can adjust the size directly on the vest you are wearing. There are three slings on each side. Slings have a margin in length – the excess can be cut off, while the ends of the slings must be melted! The excess ends of the sling are folded and hidden under the rings of elastic
Height adjustment (from 164 to 200 cm) is located on the lower edge of the back yoke and is made using two vertical slings and three-slit Duraflex® buckles connecting the yoke and lumbar. You can adjust the growth directly on a vest. Slings have a margin in length – the excess can be cut off, while the ends of the slings must be melted! The excess ends of the sling are folded and hidden under the rings of elastic
On top of the yoke sewn evacuation loop and PALS slings – 6 cells wide, 3 rows of slings in height (sewn completely one after another without gaps)
On the lumbar panel, two Duraflex® half rings are sewn for hanging crack bags on hook hooks and PALS slings – 6 cells wide, 7 rows of slings in height (sewn completely one after another without gaps)
On the shoulders above, automatic belt guards and PALS slings are sewn – on each shoulder there are 2 cells in width, 2 rows of slings in height (with a gap)
4 pockets for shops, each holds 2 AKM / AK-74 stores or 1 RPK / RPK-74. Height adjustment by Velcro valve, the volume is pulled together with a wide elastic band sewn in to protect the contents from hanging out. 2 extreme pockets are sewn to the vest base so that their back wall forms hidden flat pockets with an entrance from above, in which 1 CPD can be carried
4 pockets for hand grenades on the chest. Each has an internal pocket for the fuse and a carbine on the cord, fastened to the check for a cocking grenade with one hand
1 pocket for pyrotechnic products on the right side of the body. Open at the top with elastic partitions to protect against falling out of contents, to carry 3 CPD, or 1 ROP, or 1 RDG
1 pocket for a bayonet-knife on the left side of the body. A simple pocket with an open top, a snap hook for attaching the scabbard and a velcro fastener. Can be used to carry 1 ROP or 1 RDG
Oiler pocket, made of elastic bands with a fastener on the button, on the left side of the chest near the central zipper
Pocket for an individual dosimeter on the right side of the body near the central zipper, open at the top
2 internal pockets for flat objects (card, scarf, etc.) with Velcro access, provide short-term protection against moisture
PALS slings are sewn on the sides of the body, on each side there are 3 cells in width, 3 rows of slings in height (with a gap)
Slings: 100% Nylon
Threads: Liberty® (Netherlands) bonded nylon filament
Material:
Cordura® 1000d (100% Nylon)
Oxford 210d (100% Nylon)
Hardware: Duraflex®
Velcro: Alfatex® (Belgium)
Weight: 1100 g